IBM CP-X445 User Manual

Page 43

If you modiﬁed the IP conﬁguration or the DHCP setting, click on "Reboot" in Screen 2

to have the settings take effect.

Close the Web browser to end the conﬁguration session.

Multifunctional settings

NETWORK Menu (continued)

NOTE

• If the Projector Network Conﬁguration dialog is accessed by more than one

computer at the same time, the last computer to login retains the authority to modify the

settings. If you wish to make changes using a computer that logged on earlier, you will

need to login again to regain authority.

• Except for the login screen, all of the screens will timeout after 10 minutes of no

operation. Should this occur, you will need to login again to modify the settings.

• The 10-minute timeout remains in effect even if you close the Web browser and end

the conﬁguration session. Therefore, if you try to reestablish a session from the same

computer before the 10-minute timeout occurs, the login screen will not reappear.

However, if you reboot or if you login from another PC, the 10-minute timeout will no

longer be in effect.