IBM CP-X445 - Manual (Page 34)

34
Multifunctional settings
SETUP Menu
Item Description
WHISPER
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL  WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
MIRROR
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL  H:INVERT  V:INVERT  H&V:INVERT
VOLUME
Using the buttons ▲/▼ adjusts the volume.
High  Low
STEREO
Using the buttons ▲/▼ selects the internal speaker output mode.
MONO  STEREO
IR REMOTE
Select a remote sensor using the ▲/▼ button (1), then switch it
using the ► or the ENTER button (2).
(1) 1 : FRONT  2 : TOP (2) (Off)  (On)
• A sensor cannot be turned off when the other is off.
With the SETUP menu, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
MENU [RGB]
IMAGE
SETUP
PICTURE
INPUT
OPTION
EASY MENU
SCREEN
:SELECT
WHISPER NORMAL
MIRROR NORMAL
STEREO MONO
VOLUME 16
IR REMOTE 1: 2:
VIDEO Qlty.
NETWORK