Insignia NS-LCD22 - Manual (Page 20)

18
Insignia NS-LCD22 LCD TV
www.insignia-products.com
3 Press or to select Parental Control,
then press ENTER or .
4 Enter your password to access the Parental
Control Menu.
5 Press or to select Advanced Rating,
then press ENTER or to select ON.
6 Press or to select Advanced Parental
Lock, then press ENTER or to access the
Advanced Parental Lock screen.
7 Press or to select an item, then press
ENTER or to access the next-level menu.
8 Press or to navigate and select, then
press ENTER to block or unblock the rating.
Setting up for VGA(PC) Mode/Component
Mode
To set up for VGA or component mode:
1 Press MENU.
2 Press or to select the Feature menu,
then press ENTER or to access the
submenu.
3 Press or to select VGA Set (or
Component Set), then press ENTER or to
access the VGA or Component Setting
screen.
4 Within the menu, use , , , or to
navigate or adjust. Press ENTER or to
confirm, enter a sub-menu, or toggle the
settings of the selected menu item.
Options include:
Maintaining
About temperature
• Do not use the television in hot and cold
rooms (locations).
• When the television is used in rooms
(locations) with low temperature, the picture
may leave trails or appear slightly delayed.
This is not a malfunction and the television
will recover when the temperature returns to
normal.
• Do not leave the television in a hot or cold
location. Also, do not leave the television in a
location exposed to direct sunlight or near a
heater, as this may cause the cabinet to
deform and the screen to malfunction.
• Storage temperature: 32 to 122°F (0 to 50°C)
• Working temperature: 41 to 104°F (5 to 40°C)
Note
The actual menu options of this rating vary,
depending on the broadcaster.
Opti ons Descri pti on
H-Pos Moves the image on the screen
left or right.
V-Pos Moves the image on the screen
up or down.
Clock Adjusts the sample frequency.
Phase Improves the focusing of a
stable image.
Auto adjust (PC
mode only) Selects and activates to start
auto adjustment. The television
automatically adjusts the image
settings, such as frequency and
position.
Setting Selects and activates the
television to reset the previous
settings to the factory defaults.
NS-LCD22.fm Page 18 Monday, February 19, 2007 1:39 PM