Insignia NS-LCD22 - Manual (Page 10)

8
Insignia NS-LCD22 LCD TV
www.insignia-products.com
2 Press or to select Component, then
press ENTER to confirm.
3 Turn on your device and set it to the correct
mode.
Connecting a computer
To connect a computer:
1 Connect a VGA cable between the VGA jack
on the computer and the VGA input jack on
the television.
2 Connect an audio cable between the AUDIO
input jack on the television and the AUDIO
output jack on the computer.
To play video from a computer:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
2 Press or to select VGA, then press
ENTER to confirm.
3 Turn on your computer and adjust the display
properties as required.
Connecting headphones
To connect headphones:
•
Insert the headphone plug into the
television’s headphone jack.
Using your television
Using the Remote Control
Use the remote control by pointing it towards the
television’s remote sensor window. Objects
between the remote control and sensor window
may prevent proper operation.
Turning the television on and off
To turn the television on:
1 Insert the power cord into the wall socket.
2 Press on the remote control or television.
The television turns on.
To turn the television off:
• Press on the remote control or television.
The television turns off.
Viewing the menus and displays
This television has an easy-to-use menu system
that appears on the screen. This system makes
it convenient and fast to use features on the
television. You can also display the status of
these features while watching a program.
Note
For more information about using your component
video device, see your user guide.
Warning
To avoid hearing damage when using
headphones, adjust the headphone volume to
avoid excessive levels.
TV rear
To monitor port
(15-pin VGA)
VGA cable
(analog
RGB)
Audio cable (stereo
mini plugs)
To audio output jack
Headphones
TV side
Caution
• Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
• Do not install or place the remote control under
direct sunlight. The heat may cause
deformation of the television.
• The remote control may not work properly if the
remote sensor window of the main television is
under direct sunlight or strong lighting. In such
a case, change the angle of the lighting or
television set, or operate the remote control
closer to the remote sensor window.
Note
This illustration is for reference only. The remote
sensor may be in different locations on different
models.
NS-LCD22.fm Page 8 Monday, February 19, 2007 1:39 PM