Interquartz IQ750 - Manual (Page 33)

33
To store a caller’s details in the Directory Memory from the Caller List
1. Press CALLER; the most recent incoming caller’s name and number will be
displayed
2. Press Scroll or to select the number you want to save into the Directory
Memory
3. Press STORE; the display will show “STORE”
4. Press DIRECTORY; and the display will show “ENTER NUMBER” below the
telephone number
5. Press STORE to confirm. You can use the Cursor or to change number before
saving
6. The display will show the caller’s name; use the Cursor or to edit the
name if necessary
7. Press STORE to confirm; the display will show “DIRECTORY STORED”.
To delete a Call from the Caller List or to delete the entire Caller List
1. Press CALLER and press Scroll or to find the entry you wish to delete
2. To erase the displayed call, press CLEAR twice in rapid succession; the display
will show “ERASED”
3. To erase the entire Caller List, press CLEAR twice in rapid succession and hold the
key down on the second depression; the display will show “HOLD TO CLR CALL”
4. To prevent entire directory erasure release the CLEAR key at this time before 6
seconds has elapsed; otherwise keep holding the key down and go to the next step
5. 6 seconds from step 3 the directory will be deleted and the display will show
“CALL MEM CLEAR”.
Note: See MEMORY OPERATION section for more details of storing and dialing operations
using Direct Access and Direct Memories.