Integra DTR-7.4 - Manual (Page 77)

77
Enjoying Net Audio —Continued
IP Address Sub-menu
You can use this submenu to turn on/off the DHCP and
Auto IP functionality.
Also, you can use this menu to manually configure net-
work settings. Referring to the documentation from
your ISP, enter the IP address and subnet mask assigned
to your DTR-7.4 as well as the IP addresses of the
default gateway and DNS server.
After the necessary settings are complete, press the
Return button to go back to “5. Network Setup
Menu,” select “
→ Save Settings, ” and press the
Enter button to save the setting you made.
When you set a. DHCP/AUTO IP to Off, select a menu
item under b. and press the Enter or
button; the
DTR-7.4 will enter the number-entry mode.
Select a number using the
/ buttons, and press the
Enter button to enter the number.
After all the necessary numbers are entered, the
DTR-7.4 exits the number-entry mode.
a. DHCP/AUTO IP
Sets whether the network setting is configured automat-
ically or not.
On: The network setting will be configured automati-
cally. When you set this option to On, the values for b.
through f. will be assigned using DHCP.
Off: The network setting is configured manually.
b. IP Address
You will enter this value when you set the a. DHCP/
AUTO IP setting above to Off.
Enter the IP address assigned to your DTR-7.4. If your
DTR-7.4 is directly connected with an xDSL modem or
terminal adapter, be sure to enter the static IP address
exactly as specified by your ISP.
Specify the IP address within the range below. The Net-
work Audio cannot be used with IP addresses out of the
ranges below.
CLASS A: 10.0.0.0–10.255.255.255
CLASS B: 172.16.0.0–172.31.255.255
CLASS C: 192.168.0.0–192.168.255.255
Because the most of the commercially available routers
are set to a CLASS C IP address, specify a CLASS C IP
address for the DTR-7.4.
c. SUBNET Mask
You will enter this value when you set the a. DHCP/
AUTO IP setting above to Off.
Enter the subnet mask. If your DTR-7.4 is directly con-
nected with an xDSL modem or terminal adapter, be
sure to enter the subnet mask exactly as specified by
your ISP. Usually, enter 255.255.255.0 here.
d. Gateway
You will enter this value when you set the a. DHCP/
AUTO IP setting above to Off.
Enter the IP address of the default gateway. If your
DTR-7.4 is directly connected with an xDSL modem or
terminal adapter, be sure to enter the gateway address
exactly as specified by your ISP. If your DTR-7.4 is
connected to a gateway/router, enter the IP address of
the gateway/router.
DNS Server
e. 1st
f. 2nd
You will enter this value when you set the a. DHCP/
AUTO IP setting above to Off.
Enter the IP address of the DNS server. If your DTR-7.4
is directly connected with an xDSL modem or terminal
adapter, be sure to enter the DNS address exactly as
specified by your ISP.
When your Internet service provider provides only one
DNS address, enter this address into “e. 1st.” When two
or more DNS addresses are provided, enter both of them
into “e. 1st” and “f. 2nd,” respectively.
Note:
After setting, allow approx. 2 seconds until the DTR-7.4
stores all of the data in the memory. Be sure not to turn
off the power during that time otherwise the data will be
lost.
Proxy Setup Sub-menu
Configure this item if your DTR-7.4 uses a proxy server
to connect to the Internet.
Enter the proxy server settings exactly as specified by
your ISP.
After the necessary settings are complete, press the
Return button to go back to “5. Network Setup
Menu,” select “
→ Save Settings,” and press the Enter
button to save the setting you made.
a. Proxy Server
Sets whether the DTR-7.4 connects to Internet radio
station through proxy server or not.
On: Connects to Internet radio station through Proxy
Server.
Off: Connects to Internet radio station without Proxy
Server.
b. Proxy Address
Enter the domain name of the proxy server.
5-1.IP Address
a.DHCP/AUTO-IP :On
b.IP Address
:192.168. 9. 10
c.SUBNET Mask
:255.255.255. 0
d.Gateway
:192.168. 9. 1
DNS Server
e.1st:192.168. 9. 1
f.2nd: 0. 0. 0. 0
5-2.Proxy Setup
a.Proxy Server
:Off
b.Proxy Address
:
c.Proxy Port
: 0
Quit:[SETUP]
Making Full Use of
Y
our DTR-7.4