Integra DTR-7.4 - Manual (Page 48)

48
Listening to Radio Broadcasts
One of the features of the DTR-7.4 that is most fre-
quently used is its ability to play FM and AM broadcast
radio stations. The DTR-7.4 provides a number of listen-
ing modes perfect for listening to the radio and getting
the most out of your audio system. Also, by presetting
radio stations that you listen to frequently, you can select
them easily by pressing the CH/Disc +/– button on the
remote controller.
• The tuner frequency changes in 100 kHz (50 kHz)
increments for FM and 10 kHz (or 9 kHz) increments
for AM.
• You can press the Tuning or button continuously
for more than 0.5 seconds to scan for an FM station in
the direction of the button you pressed (FM auto tun-
ing mode). After you release the button and a station
is received in stereo, the scanning stops.
Listening to a stereo radio station (FM mode)
When you tune into a radio station,
TUNED indicator appears in the
display. If you tune into an FM station
in stereo, then “FM STEREO” appears.
If the signal is weak, it may be impos-
sible to tune into the station in stereo. In
such a case, press the FM Mode but-
ton on the front panel. The AUTO indi-
cation disappears and the radio station
is output in the monaural mode. To
return to stereo, press the FM Mode
button again. “AUTO” appears. Some
inter-station noise may be heard, but
the sound will not cut in and out as it
would if stereo was selected.
Specifying Radio Stations by Frequency
To select a radio station by entering its
frequency, press the remote controller’s
Direct Tuning button, and then use the
number buttons to enter the frequency.
--/---
@. - ' / ABC DEF
PQRS TUV WXYZ
GHI JKL MNO
TV CH
TV VOL
RC- 550M
+10 0
1 2 3
4 5 6
7 8 9
THX
DSP DSP
+
-
+
-
Direct Tuning
Caps Delete Language Loca t ion
Album Ar tist Genre Playlist
Custom
Display
Dimmer
T V
Input
Sleep
Muting
Angle Subtitle Audio
Memory Search A-B Repeat
T V On Standby
Audio AD J
Exit Gu ide
Random Step / Slow Rec
Last Memory
Clear
Input
To p M enu Men u
Set up Retu rn
Zone 2
Input Mode
Macro
CH VOL Disc
Test Tone CH SEL
Pure A
Surround
Direct
Stereo
Re-EQ
All CH ST
Level + Level -
L Night Audio SEL
Enter
Master Volume Standby/On
Upsampling Pure Audio
Audio Selector Tape Tuner Phono Net Audio CD Video 1
VCR 1
Video 3 Video 2
VCR 2
Video 4 Video 5 DVD Zone 2 ( ) GRN Rec ( ) RED
A-FO RM Listening Mode Memory
Video 5 Input
Stereo Direct / Pure Audio DSP Surround THX
Clear
Rec Out Zone 2 Of f
Setup Tuning
Preset
Enter
Return
Dimmer Display
S Video Audio Video L R
Phones
Standby
Memory FM Mode
DTR-7.4
Digital
Tuning /
Preset / FM Mode
Memory
CH/Disc +/–
Input
Tuner
Scroll wheel
Tuning Into a Radio Station
1 Press the Tuner input source but-
ton.
Each time you press the Tuner button, the
input source changes between AM and
FM.
2 Using the Tuning and buttons
on the front panel, tune into the
station you desire.
Tuner
Tuning
Preset
Band Frequency
Auto mode
Tuned in
stereo
“FM STEREO”
(Lights red)
Clear
Memory FM Mode
Direct Tuning
Clear