IBM 19K4543 - Manual (Page 31)

Appendix A. Product specifications A-5
When installing High-Rate Wireless LAN PC Cards, the channel configuration is
managed as follows:
• For wireless clients that operate in a High-Rate Wireless LAN Infrastructure, the
High-Rate Wireless LAN PC Card automatically starts operation at the channel
identified by the access points. When roaming between different access points, the
station can dynamically switch to another channel if required.
• For High-Rate Wireless LAN PC Cards installed into wireless clients that operate in
an Peer-to-Peer workgroup mode, the PC Card will use channel 10 by default.
• When inserted into a access point, the High-Rate Wireless LAN PC Card will use the
factory-set default channel, unless the LAN Administrator selected a different
channel when configuring the access point device.
11 2462 2462 2462 2462
12 n/a 2467 2467 2467
13 n/a 2472 2472 2472
14 n/a n/a n/a 2484
Channel ID FCC ETSI FR JP