ICP DAS USA MSM-508 - Manual (Page 18)

Industrial Redundant Ring Switch – Managed Switch Console Manual
Release No. : 0804-V1 16
▓ ▓ ▓ ▓ COM2 [baud rate][data bit][parity][stop bit]
Description
The second serial port Com2 is assigned for RS485. This command enables you to set up
the transmission speed (baud rate),data bit (data bit), parity check type (parity) and stop bit
(stop bit).
Setting parameters are the same as COM1.
▓ ▓ ▓ ▓ RING [pair][enable|disable]
Description
1. Display ring setting
2. Enable ／ Disabled Ring Pair
Parameters
Parameter Description
pair Specify ring pair 1 or 2
enable|disable Enable／Disabled Ring Pair .
Example