ICP DAS USA MSM-508 - Manual (Page 12)

Industrial Redundant Ring Switch – Managed Switch Console Manual
Release No. : 0804-V1 10
Set Relay active if Power 1 or Power 2 fail
▓ ▓ ▓ ▓ LVALUE
Description
This command enables you to read link status showing by a hexadecimal number that
represents the 8 bits corresponding binary numbers. Bit 0 corresponds to port 1, etc. If
there is link loss occurring on port(s), the corresponding bit(s) will be set up as 1.
Example
Link loss occurring on port 2,3,4,5,6 and 8.
▓ ▓ ▓ ▓ CMASK
Description
This command enables you to read ring pair communication status showing by a
hexadecimal number that represents the 8 bits corresponding binary numbers. Bit 0
corresponds to port 1, etc.. If there is a communication loss occurring on port(s), the
corresponding bit(s) will be set up as 1.
Example