Pnp/pci configuration – Intel ATC6430M User Manual

Page 35

Chapter 3 Award BIOS Setup

ATC6430M Mainboard

3-2-6

PNP/PCI CONFIGURATION

This screen configures the PCI Bus slots.

PnP/PCI Configurations

PNP OS Installed No

Reset Configuration Data

Disabled

Resources Controlled By Auto

Ø IRQ Resources

Press Enter

Ø DMA Resources Press Enter
Ø Memory Resources

Press

Enter

PCI/VGA Palette Snoop Disabled

Item Help
--------------------
Menu Level

Select “Yes” if you are
using a Plug and Play OS.
Select NO if you need the
BIOS to confirm
non-boot device.

↑↓←→

Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help

F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults

PNP OS Installed Select “Yes” if you are using a Plug nad Play OS. Select “No” if
you need the BIOS to confirm non-boot device.

Reset Configuration Data This item allows you to determine whether to reset the
configuration data or not.

Resource Controlled by The Award Plug and Play BIOS has the capability to
automatically configure all of the boot and Plug & Play compatible devices. However,
this capability means absolutely nothing unless you are using a Plug and Play OS such
as Windows 95. Choices are Auto and Manual.

IRQ Resources; DMA Resources When resources are controlled manually, assign
each system interrupt/DMA channel a type, depending on the type of device using the
interrupt/DMA channel.

IRQ3/4/5/7/9/1011/12/14/15, DMA0/1/3/5/6/7 Assign to This item allows you to
determine the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot.
Choices are Legacy ISA and PCI/ISA PnP.

Memory Resources “Memory Resources” has two events:
Resources Memory Base N/A