Assembly instruction, Diagram 1 – Impex DBR 92 User Manual

Page 6

Text mode
Original mode

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: One Adjustable Wrench and Allen Wrench
NOTE: It is strongly recommended this machine be assembled by two or more people to
avoid possible injury.

STEP 1 (See Diagram 1)
A.) Connect the Left Stabilizer (#3) to the Left Upright Beam (#1). Secure the side with two M10 x

3 ½” Allen Bolts (#13), four

∅

¾” Washers (#9), and two M10 Aircraft Nuts (#14). Secure the

Bottom with one M10 x 5/8” Allen Bolt (#10) and Ø ¾” Washer (#9). Do NOT tighten all the
Nuts and Bolts yet.

B.) Repeat the above procedure A to Connect the Right Stabilizer (#4) to the Right Upright Beam

(#2).

DIAGRAM 1