ICP DAS USA RS-405/405F User Manual
Page 49
Industrial Redundant Ring Switch
– RS Series User Manual
TDRS4050601
pp
Upgrade Firmware
To upgrade firmware, please do the following steps:
1. Download the newest version firmware from ICPDAS website.(?)
2. Click on
the “Upgrade Firmware” button.
3. The system will prompt you if you really want to upgrade firmware. Click
“Yes” to
continue.
4. Browse the path to get the firmware you want to upgrade.
5. It may take a few minutes to upgrade firmware. Please do not power off or disconnect
the device while upgrading the firmware. This may cause serious damage.
6. After the firmware has been upgraded successfully, a message will pop up to inform
you the firmware upgrade is completed, click on
“OK” to close the message.
Default
Click on
“Default” button allows you to restore settings to factory default values. The
system will prompt you if you really want to restore factory defaults. Click
“Yes” to
continue or
“No” to cancel.