Impex TC-6000 - Manual (Page 7)

STEP-2 (See Diagram 2)
A.) Attach the Upper Vertical Frame (#1) onto the Lower Vertical Frame (#2). Secure it with six
M10 x ¾” Allen Bolts (#20) and six Ø ¾” Washers (#24).
B.) Attach the Right Dip Support (#6) to the Upper Vertical Frame. Secure it with two M10 x ½”
Allen Bolts (#19). Do not over tighten the Bolt. Make sure the Dip Support is able to fold
up.
C.) Thread the Vertical Support (#10) onto the Right Dip Support.
D.) Repeat B & C to install the Left Dip Support (#7).
E.) Attach the Upper Frame (#3) onto the Upper Vertical Frame. Secure it with four M10 x 2 7/8”
Allen Bolts (#21), eight Ø ¾” Washers (#24), and four M10 Aircraft Nuts (#26).
F.) Insert the Chin-up Bar (#9) to Upper Frame from both ends. Secure each Chin-up Bar with
one M5 x ¼” Allen Bolt (#27).
G.) Fold up the Left & Right Dip-Support when doing Chin-up exercises.
6