iRobot DISCOVERY 400 - Manual (Page 19)

For more detailed information, visit: www.irobot.com 19
Scheduler Remote Control
(optional accessory for select models)
The Scheduler Remote Control is included with the Roomba Scheduler.
Other Roomba models are compatible with the iRobot Scheduler Remote
Control Upgrade.
Use the Scheduler Remote Control to program your cleaning times. Then
send your schedule to Roomba and the scheduling Virtual Walls. Install
the batteries and set the time before using for the first time.
Setting the Time
1
Open the Scheduler Remote Control’s front cover.
The display will turn red and read “SET TIME.”
2
Press New/Save and Delete simultaneously.
The display will change to read “SUN 12:00.”
3 Press to change the day.
4 Press to navigate to the hour on the display.
5
Press to change the hour. To select AM or PM,
simply scroll past 12:00.
6 Press to navigate to the minute on the display.
7
Press to change the minute. Hold to
scroll quickly.
8
Press New/Save to save. After the time has been
set, it will flash three times to indicate the time
has been saved. Close the Scheduler Remote’s
cover to verify that the correct time has been set.
Power
Scheduling
Virtual
Wall
Spot
Max
CLEAN
Front
Cover
Directional
Buttons