Assembly instruction, Diagram 1 – Impex WM 1407 User Manual

Page 5

Text mode
Original mode

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
NOTE: It is strongly recommended two or more people assemble this machine to avoid
possible injury.

STEP 1 (See Diagram 1)
A.) Attach the Base Frame (#5) to the Rear Base Frame (#6). Align the holes then secure them

with one 4 3/8” x 1 ¾” Bracket (#19), two M10 x 2 ½” Carriage Bolts (#38), two

∅

¾” Washers

(#53), and two M10 Aircraft Nuts (#50).

B.) Attach the Rear Vertical Frame (#9) to the other end of Rear Base Frame (#6). Align the holes

then secure them with one 4 3/8” x 1 ¾” Bracket (#19), two M10 x 2 ½” Carriage Bolts (#38),
two

∅

¾” Washers (#53), and two M10 Aircraft Nuts (#50).

DIAGRAM 1