Impex CB-180 - Manual (Page 7)

STEP 2 (See Diagram 2)
A.) Insert the Main Support Frame (#5) into the Seat Support Frame (#6). Secure them
with two M8 x 2 1/8” Hex Bolts (#18), two Brackets (#16), four Ø 5/8” Washers (#24),
and two M8 Aircraft Nuts (#26).
B.) Attach the Main Support Frame (#5) to the Cross Brace (#4). Secure it with two M8 X
2 1/8” Hex Bolts (#18), one Bracket (#16), four Ø 5/8” Washers (#24), and two M8
Aircraft Nuts (#26).
C.) Attach the Seat Support Frame (#6) to the Leg Developer Holder (#7). Secure it with
two M8 x 2 1/8” Hex Bolts (#18), one Bracket (#16), four Ø 5/8” Washers (#24), and
two M8 Aircraft Nuts (#26).
D.) Place the Seat Pad (#12) onto the Seat Support Frame (#6). Secure it with two M6 x
5/8” Hex Bolts (#21) and two Ø ½” Washers (#25).
DIAGRAM 2
6