Intel ICH10R - Manual (Page 27)

22
(10) ESATA Port: ESATA ports from CN1, CN2
These two connectors support the External Serial ATA2 (eSATA) to enable the full SATA
interface speed outside the chassis.
(11) SPDIF Out connectors: SPDIF_Out1
The SPDIF output is capable of providing digital audio to external speakers or compressed
AC3 data to an external Dolby digital decoder. Use this feature only when your stereo system
has digital input function.
2-6-2 Headers
(1) Line-Out/MIC Header for Front Panel (9-pin): FP_AUDIO1
These headers connect to Front Panel Line-out, MIC connector with cable.
(2) USB Port Headers (9-pin): USB1/USB2
These headers are used for connecting the additional USB port plugs. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
USB Port Header
Pin 1
VCC
-
DA
TA
GN
D
+D
AT
A
VC
C
OC
-
DA
TA
GN
D
+D
AT
A
(3) Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(4) Power LED: PWR LED
The Power LED is light on while the system power is on. Connect the Power LED from
the system case to this pin.
(5) IDE Activity LED: HD LED
This connector connects to the hard disk activity indicator light on the case.
(6) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method of
L in e-O ut, M IC H ead ers
AU D IO
P in 1
L
ineout
2-L
L
ineout
2-R
Sense
-FB
Au
dio-G
ND
LIN
E2-JD
Audio
-JD
2
9
10
KE
Y
MIC
2-L
MIC
2-JD
MIC
2-R