Storing the system, Ensure the cover surface is inside the roll, 5 maintenance and troubleshooting – Invacare MA85 User Manual
Page 30
5 MAINTENANCE AND TROUBLESHOOTING
Invacare®MA80 Series Mattresses
30
10. Perform the following steps to clean the mattress components (air cushions, mattress base, etc.):
A. Using a clean sponge or paper towel, wipe down the mattress components with a dilute detergent solution of quaternary cleaner disinfectant
or other germicidal detergent solution.
B.
Wipe the mattress components with a clean dry cloth.
Storing the System
1.
Ensure that the control unit is off and disconnect the power cord from the wall outlet.
2.
Clean the system. Refer to Cleaning the System on page 28.
3.
Disconnect the air hose connector from the control unit and allow air to vent from the mattress.
4.
Gently roll up the mattress with minimal handling and agitation.
5.
Ensure the cover surface is inside the roll.
6.
Store the unit, keeping the mattress with the control unit.