Invacare MA85 - Manual (Page 18)

4 OPERATION
Invacare®MA80 Series Mattresses 18 Part No 1148138
1. Examine the hospital grade power cord supplied with the control
unit.
2. Perform one of the following:
•
If the plug is damaged - Call your supplier for a replacement
hospital grade cord.
• If the plug is not damaged - Plug the end of the supplied hospital
grade power cord into the power outlet on the side of the
control unit.
3. Plug the other end of the plug into a properly grounded outlet on
the wall.
FIGURE 4 Connecting the Power Cord
 Once the unit is plugged in, an AMBER LED on the
control unit is lit indicating that the system is in
STAND BY mode.
Power
Outlet
Control Unit