Remove the original foam mattress from the bed, Head end - head end bed deck, Foot end - foot end bed deck – Invacare MA85 User Manual
Page 15: Center - center of the bed frame, Hose, 2 installing the side rails, Warning
4 OPERATION
15
Invacare®MA80 Series Mattresses
1.
Remove the original foam mattress from the bed.
2.
If necessary, lower side rails to facilitate installation of the mattress.
3.
Unroll the powered mattress and place it on the bed frame.
4.
Use the buckle straps to secure the powered mattress to the bed
deck in the following locations:
•
Head End - Head End Bed Deck
•
Foot End - Foot End Bed Deck
•
Center - Center of the Bed Frame
FIGURE 1 Installing the Mattress Replacement System
4.2
Installing the Side Rails
The powered mattress comes with ten nylon
buckle straps.
Ensure that hose is towards the foot end of the bed.
Hose
Foot End
Head End
Powered Mattress
Buckle
Straps
ƽ
WARNING
Patient entrapment with bed side rails may cause injury or death. Mattress MUST fit bed frame and side rails snugly to
prevent patient entrapment. Follow the manufacturer’s instructions. Monitor patient frequently. Read and understand the
Owner’s/Operator’s Manual prior to using this equipment. Invacare product manuals are available at www.invacare.com or
your dealer.
Refer to the instructions provided with the side rails for the installation procedure.