Intel GS-SR195V - Manual (Page 42)

4 2
GS-SR195V Rack Mount Server
Serial Port B
This allows users to configure serial prot B by using this option.
Disabled Disable the configuration.
Enabled Enable the configuration (Default value)
Base I/O Address/IRQ
3F8/IRQ4 Set IO address to 3F8.
2F8/IRQ3 Set IO address to 2F8. (Default value)
3E8/IRQ4 Set IO address to 3E8.
2E8/IRQ3 Set IO address to 2E8.
Floppy disk controller
Enabled Enable the floppy disk controller. (Default value)
Disabled Disable the device.
Floppy Check
Enabled Enable the device to verify floppy typer when system boot.
Disabled Disable the this function. (Default value)
Parallel ATA
Disabled Disable the device.
Both Select both Channel 0 and Channel 1 as Parallel ATA.
(Default value)
Channel 0 Select both Channel 0 as Parallel ATA.
Channel1 Select both Channel 1 as Parallel ATA.