IBM T221 - Manual (Page 26)

20
Appendix A. Specifications
The specifications of the monitor are as follows:
Maximum
addressability Horizontal:
Vertical: 3840 pixels
2400 pixels
Size (viewable image
area) Diagonal 564mm(22.2”)
Active display area Horizontal:
Vertical: 478mm(18.7”)
299mm(11.8”)
Brightness 235 cd/m
2
typical
Contrast 400:1 typical
Dimensions Width:
Height:
Depth: 547 mm (21.5 in.)
437 mm (17.3 in.)
196 mm (7.7 in.)
Weight Unpackaged: With base stand: 11.4 kg (25.1 lb.)
Without stand: 8.8kg (19.4 lb.)
Power adapter: 1.3 kg (2.9 lb.)
Tilt Angle: -5°~ +30°
Power Input: 100 - 240 V AC, 50/60 Hz
Power consumption Maximum:
Minimum: 150 W
Less than 5 W (In Standby Mode)
Video input DVI TM signal interface using supplied cables
(RGB: 8 bits)
User controls Power On/Off, Brightness
Regulatory compliance • AN/NZS 3548
• CISPR22 A
• FCC-A
• IEC 60950 3rd Ed.
• UL 60950 3rd Ed./CSA C22.2 No. 60950-00
• VCCI-A
•
ISO 13406-2
• TCO’95
• MIC E-B012-03-1124(A) (9503-DG3)
• MIC E-B012-03-4147(A) (9503-DG5)
Image Formation Time 62 ms (measured according to ISO 13406-2)
Display area Horizontal:
Vertical: 478.1 mm (18.8 in.)
298.8 mm (11.8 in.)
Temperature Operating:
Shipping (by Air & within 24 Hours):
Shipping (other than above)/Storage:
0~35℃
-20～60℃
1～60℃
Relative humidity Operating:
Shipping (by Air & within 24 Hours):
Shipping (other than above)/Storage:
8~80%(and No Condensation)
8~80%(and No Condensation)
8~80%(and No Condensation)