IBM T221 User Manual

Page 16

Text mode
Original mode

4. Press the power switch on the monitor. The power light comes on.

Notes:
a. When you turn off the monitor, wait at least five seconds before

turning it on again.

b. If you accidentally disconnected the power cord from the main outlet

and you connected it to the outlet again, the screen may flicker
continuously. To stop the flicker, press the power switch and turn off
the monitor, then turn it on again.

c. Refer to “Checking the operating status of your monitor” on page 16

for more information on the power light.

This completes the hardware setup.

When powering on the different units, power them on in the following
sequence:

1. Monitor
2. Peripheral

units

3. Personal computer or workstation

Power switch

Power light

Supplementary Information