Impex IGS-07 - Manual (Page 5)

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench
NOTE: It is strongly recommended this machine to be assembled by two or more
people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Rear Stabilizer (#33) and the Base Frame (#45) to the Main Stabilizer (#35).
Secure them with two M12 x 4” Carriage Bolts (#38),
∅
1” Washers (#12) and M12
Aircraft Nuts (#13).
B.) Attach the Rear Vertical Beam (#19) to the Rear Stabilizer (#33). Secure it with two M12
x 1” Allen Bolts (#29) and
∅
1” Washers (#12).
C.) Attach the Front Vertical Beam (#22) to the Base Frame (#45). Secure it with two M12 x
4” Carriage Bolts (#38),
∅
1” Washers (#12), and M12 Aircrafts (#13).
D.) Attach the Seat Frame (#53) to the Base Frame (#45). Secure it with three M12 x 1’
Allen Bolts (#29) and
∅
1” Washers (#12).
4