Smith machine assembly instruction, Diagram 1 – Impex TSA 5000 User Manual

Page 7

Text mode
Original mode

SMITH MACHINE ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the two Base Frames (#1) by a Cross Brace (#2) in the mid-span. Secure

each end of The Cross Brace with two M10 x 3 ½” Carriage Bolts (#79), one 4 ¾” x
2” Bracket (#36), two Ø ¾” Washers (#66), and two M10 Aircraft Nuts (#86).

B.) NOTE: DO NOT tighten the Nuts and Bolts yet.

DIAGRAM 1