Diagram 5 – Impex TSA 5000 User Manual

Page 26

STEP 5 (See Diagram 5)

A.) Attach the Arm Curl Pad (#15) to the Arm Curl Stand (#4). Secure it with two M8 x 5/8”

Allen Bolts (#41) and two

∅

5/8” Washers (#43). Insert the Arm Curl Stand into the front

opening on the Main Frame (#1). Use the Lock Knob to hold the desired Arm Curl height.

B.) Attach the Curl Bar Support Frame (#11) to the open bracket on the Leg Developer (#5).

Lock it with a L-shaped Pin (#21).

C.) Remove the Pin, Curl Bar Handle and Arm Curl when using the Leg Developer to exercise.

DIAGRAM 5