Multipurpose bench assembly instruction, Diagram 1 – Impex TSA 5000 User Manual

Page 22

Text mode
Original mode

MULTIPURPOSE BENCH ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended this machine be assembled by two or
more people to avoid possible injury.

STEP 1 (See Diagram 1)
C.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure each end with

two M10 x ¾” Allen Bolts (#36) and

∅

¾” Washers (#42). Attach a Lock Knob (#23) to the

hole underneath the Main Frame.

D.) Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9). Align the hole then secure

it with a Knob Lock (#23) to hold the Sliding Block in position.

E.) Attach the Incline Adjustment Bar to the brackets on the Main Frame. Secure each end with

one M10 x 2 ½” Carriage Bolt (#35),

∅

¾” Washer (#42), and M10 Aircraft Nut (#44).

DIAGRAM 1