Insignia NS-LCD42 - Manual (Page 13)

11
Insignia NS-LCD42 42" LCD TV
www.insignia-products.com
• Highlight Phase, then press OK. Press
the or buttons to adjust the focus and
picture stability.
5 Press EXIT to return to the picture.
Connecting a video camcorder
To connect a video camcorder to your TV:
1 Connect the yellow video cable from the
video output jack on your camcorder to the
VIDEO IN 1 jack on the side panel or the
VIDEO IN 2 jack on the rear panel of the TV.
2 Connect the white/red audio cables from the
AUDIO (L/R) output jacks on your camcorder
to the AUDIO IN 1 jacks on the side panel or
the AUDIO IN 2 jacks on the back panel of
your TV.
3 Press the INPUT button on your remote
control to select the video input to view
(Video 1 (side) or Video 2 (back)).
Connecting a game console
To connect a game console to your TV:
1 Connect the game cables or block adapter
from the output jacks on your game console
to the VIDEO IN 1 jack on the side panel or
the VIDEO IN 2 jack on the rear panel of the
TV.
2 Connect the white/red audio cables from the
game console to the AUDIO IN 1 jacks on the
side panel or the AUDIO IN 2 jacks on the
back panel of your TV.
3 Press the INPUT button on your remote
control to select the video input to view
(Video 1 (side) or Video 2 (back)).
Using your LCD TV
Turning on your TV
To use your LCD TV:
1 Plug in your TV (see “Connecting your TV to
a power outlet” on page 6).
2 Connect your TV to an antenna or cable (see
“Connecting to an antenna or cable outlet” on
page 6).
3 Turn on your TV by pressing the Power
button on the TV or on the remote control.
Performing the initial setup
The TV and Setup menus provides for the initial
setup of your TV to receive TV broadcasts, from
either cable or your own antenna. During the
initial setup the TV will perform an automatic
scan of all available channels, let you designate
channels to skip, and let you select your local
time zone. Your antenna or cable must be
connected to proceed.
To initially setup your TV to receive TV
broadcasts:
1 Turn on your TV.
2 Press the MENU button on the remote
control. The initial on-screen menu opens.
3 Press the or buttons to select TV, then
press OK. The TV menu opens.
Game cables or
block adapter
Game console
Favorite List On