2 installing/removing the safety flag, Warning, For this procedure, refer to figure 12.2 – Invacare Lynx L-3X User Manual
Page 53: Installing, Install safety flag into bracket, Removing, Remove the safety flag from the bracket, Accessory tube, Figure 12.2 installing/removing the safety flag
12 ACCESSORIES
53
12.2 Installing/Removing the Safety Flag
Installing
1.
Install the bracket into the accessory tube located on the back of
the seat.
2.
Install mounting knob to secure the bracket in place. Securely
tighten.
3.
Install safety flag into bracket.
Removing
1.
Remove the safety flag from the bracket.
2.
Remove the mounting knob that secures the bracket in place.
3.
Remove the bracket from the accessory tube located on the back
of the seat.
FIGURE 12.2 Installing/Removing the Safety Flag
ƽ
WARNING
The installation of the safety flag onto the back of the scooter seat significantly increases the length of the scooter. When
turning the scooter or swiveling the scooter seat, it is important to take note of this increased length - otherwise, injury
and/or damage to the surrounding property may result.
For this procedure, refer to FIGURE 12.2.
Accessory
Tube
Mounting Knob Installs in One
of These Locations
Accessory
Tube
Bracket
Safety Flag
Insert Into Accessory
Tube