5 adjusting the arm width, For this procedure, refer to figure 7.5, Push the arm in or out to the desired position – Invacare Lynx L-3X User Manual
Page 34: Arm tube, Figure 7.5 adjusting the arm width, 6 replacing armrest pads, For this procedure, refer to figure 7.6, Remove the old armrest pad, Arm pad, Figure 7.6 replacing armrest pads
7 SEAT AND ARMS
34
7.5
Adjusting the Arm Width
1.
Loosen the knob securing the arm tube to the seat frame.
2.
Push the arm in or out to the desired position.
FIGURE 7.5 Adjusting the Arm Width
7.6
Replacing Armrest Pads
1.
Remove the two mounting screws that secure the armrest pad to
arm.
2.
Remove the old armrest pad.
3.
Install new armrest pad and securely tighten with existing mounting
screws.
4.
If necessary, repeat STEPS 1-3 to replace the other armrest pad.
FIGURE 7.6 Replacing Armrest Pads
For this procedure, refer to FIGURE 7.5.
When installing the arms during set up, the four
mounting screws are installed on the seat hinge for
shipping purposes.
Arm
Tube
Seat Frame
Knob
Arm
For this procedure, refer to FIGURE 7.6.
Arm Pad
Arm
Mounting Screws