Strap, Figure 10.2 removing/installing the batteries – Invacare Lynx L-3X User Manual
Page 42
10 BATTERIES
42
6.
Perform the following to install a battery from the battery tray:
A. With the battery terminals facing towards the center of the scooter, position the battery onto the battery tray.
B.
Position the hook and loop fastening battery strap around the battery and to secure the battery to the battery tray.
7.
Repeat STEP 6 to install the remaining battery into the battery tray.
8.
Connect the two GRAY battery connectors to the wiring harness connectors.
9.
Align tabs on the rear shroud with the slots (not shown in figure) in the front shroud.
10. Place rear shroud on the frame and press down slightly.
11. Reinstall the seat. Refer to Removing/Installing the Seat on page 27.
\
FIGURE 10.2 Removing/Installing the Batteries
New batteries MUST be fully charged before using, otherwise the life of the batteries will be reduced.
Strap
Batteries
Battery Wiring Harness Connectors
Battery
Connectors