Hardware requirements, Server chassis, Processor – Intel SE7520BD2 User Manual
Page 24
Server Board Features
24
Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the
requirements outlined below. For a list of qualified components, see the links under “
Server Chassis
The following table shows the product codes for the Server Board SE7520BD2 and the product
codes for the Intel Server Chassis into which the various versions of the board can be installed. If
you are using a non-Intel chassis, see your chassis documentation for support information.
Table 5. Intel
®
Server Chassis Supported for each Server Board SE7520BD2 Product Code
SC5275E
SC5300
SC5300BRP
SC5300LX
SC5295DP
SC5295BRP
SE7520BD2
Supported Supported Supported Supported
Not
supported
Not
supported
SE7520BD2SCSI
Supported Supported Supported Supported
Not
supported
Not
supported
SE7520BD2V
Supported Supported Supported Supported
Not
supported
Not
supported
SE7520BD2SATAD2
Supported Supported Supported Supported Supported Supported
SE7520BD2SCSID2
Supported Supported Supported Supported Supported Supported
SE7520BD2VD2
Supported Supported Supported Supported Supported Supported
Processor
The Intel
®
Server Board SE7520BD2 (all product codes) supports up to two Intel
®
Xeon™
processors with an FC-mPGA4 using Socket 604, and an 800-MHz Front Side Bus (FSB) with
frequencies starting at 2.8 GHz using the 90-nanometer technology. Previous generations of the
Intel
®
Xeon™ processors are not supported.
When two processors are installed, both must be of identical revision, core voltage, cache size, and
bus/core speed. When a single processor is installed, it must be in the socket labeled CPU1.
For a link to the complete list of supported processors, see: