Intel AN430TX - Manual (Page 11)

AN430TX SPECIFICATION UPDATE
5
NO. PLANS ERRATA
20 NoFix System using 3-mode floppy drive cannot read XDF format diskettes
21 NoFix System will not boot from ISA video adapter if Scan User Flash is enabled
NO. PLANS SPECIFICATION CLARIFICATIONS
1 Doc Advanced Power Management (APM) will not function as expected with Universal Serial Bus
(USB) enabled
2 Doc LS-120 drive and floppy will not function as expected for BIOS recovery
3 Doc PCI 2.1 Specification optional features
4 Doc Supervisor and user passwords
5 Doc Power supply considerations
6 Doc LS-120 drive configured as a boot device
7 Doc Resource allocation with all PCI slots used
8 Doc Using shift print screen in BIOS Setup
NO. PLANS DOCUMENTATION CHANGES
1 Doc Revision of Section 1.6.1, “Main Memory”
2 Doc Addition of “Power On” section
3 Doc Revision of Section 5.1, “Specifications”
4 Doc Revision of Section 1.7.1, “82439TX System Controller (MTXC)”
5 Doc Revision of Section 1.12, “Add-In Board Expansion Connectors”
6 Doc Revision of Section 1.13.1, “Processor Configuration (J9C1-C, D)”
7 Doc Revision of Section 1.6.1.1, “EDO DRAM”
8 Doc Revision of Section 1.8.1, “Serial Ports”
9 Doc Revision of Section 1.13.3, “Clear CMOS (J9C1-A)”
10 Doc Revision of Section 1.16.1, “Power Supply Considerations”
11 Doc Revision of Section 3.1.12, “USB Support”
12 Doc Addition of “BIOS Beep Codes” section
13 Doc Revision of Section 3.1.4, “PCI IDE Support”
14 Doc Revision of video memory address
15 Doc Change to description of Manufacturing Options
16 Doc Addition of section describing real time clock