Icom IGM1600 - Manual (Page 20)

15
5
SET MODE
D VOX delay “dL” (Available for on-board use only)
Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps)
keeping the radio in transmit mode after you stop speaking.
• Setting the delay to 0.5 (0.5 sec.) is a short VOX delay.
• Setting the delay to 3.0 (3.0 sec.) is a long VOX delay.
SET MODE LIST
*default setting
Push
VOX delay 1.0 (default) VOX delay 3.0
Function Indication Condition
Beep tone function “bP” OFF/ON*/US
Monitor switch action “Sq” PUSH*/HOLD
Backlighting function “bL” OFF/1/2/3*
LCD contrast selection “LC” 1/2/3*/4
Auto power save function “PS” OFF/ON*
Self check function “SC” OFF*/ON
Battery voltage indicator “bt” OFF*/ON
Signal strength indicator “SI” OFF*/ON
Squelch sensitivity “SS” OFF*/ON
VOX gain “ga” 1/2/3*/4/5/6
VOX delay “dL” 0.5/1.0*/1.5/2.0/2.5/3.0