Invacare 6027 - Manual (Page 4)

Walker Platform Attachment 4 Part No 1141466
Adjusting Angle
NOTE: For this procedure, refer to FIGURE 4.
1. Loosen the adjustment knobs that
secure the support tube to the
U‐clamps.
ƽ WARNING
DO NOT apply full weight while adjusting
the angle, injury may result.
2. Gently, lay arm on arm pad.
3. Turn the support tube until desired
angle is obtained.
4. Retighten adjustment knobs securing
the support tube in position.
FIGURE 4 Adjusting Angle
Adjusting Tilt
NOTE: For this procedure, refer to FIGURE 5.
1. Loosen tilt adjustment knob.
NOTE: This is located where the support tube
connects with the arm support.
2. Lift up or push down on arm tube to
obtain the desired tilt.
3. Retighten tilt adjustment knob securely.
FIGURE 5 Adjusting Tilt
Securing the Arm Strap
NOTE: For this procedure, refer to FIGURE 6.
1. Unfasten arm strap by pulling up on
the hook and loop fastening strap.
2. Loosen arm strap by pulling through ring.
3. Slide arm into position.
4. Pull fastening strap until a snug fit is
obtained.
5. Fold the hook and loop fastening strap
over ring and secure to arm strap.
FIGURE 6 Securing the Arm Strap
Adjustment
Knobs
U-Clamps
Arm Pad
Support Tube
Tilt
Adjustment
Knob
Arm Tube
Arm
Pad
Arm Strap
Ring
Fastening Strap
(hidden from view)