Invacare 6027 - Manual (Page 2)

Walker Platform Attachment 2 Part No 1141466
ƽ INSTALLATION WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching component parts are secure.
Attaching the Platform Attachment
ƽ WARNING
Ensure that the walker is securely locked into the open position before installing the
walker platform attachment.
NOTE: For this procedure, refer to FIGURE 1.
NOTE: Reverse this procedure to remove the platform attachment.
1. Open walker and secure in locked position before installing the walker platform
attachment.
2. Determine which side of the walker the platform attachment will be mounted.
3. Loosen the adjustment on the upper clamp assembly (Detail “A”).
4. Open the clamp assembly and align it with the walker frame.
5. Close the clamp assembly over the walker frame.
6. Securely tighten the adjustment knob on the clamp assembly.
7. Repeat STEPS 3 to 6 for the lower clamp assembly (Detail “B”).
FIGURE 1 Attaching the Platform Attachment
Upper Clamp
Assembly
Adjustment
Knob
Adjustment
Knob
Lower
Clamp
Assembly
Walker
Frame
Front of
Walker
DETAIL “A” - UPPER CLAMP ASSEMBLY
DETAIL “B” - LOWER CLAMP ASSEMBLY
Adjustment
Knob
Adjustment
Knob