Invacare 6027 - Manual (Page 3)

Part No 1141466 3 Walker Platform Attachment
Attaching/Adjusting the Arm Tube
NOTE: For this procedure, refer to FIGURE 2.
Attaching
1. Loosen arm tube adjustment knob, located just below the arm pad.
2. Slide arm tube into slot provided located underneath arm pad.
3. Adjust arm tube to desired position.
4. Securely tighten the arm tube adjustment knob.
Adjusting
1. Loosen the arm tube adjustment knob,
located just below the arm pad.
2. Slide arm tube in or out to the desired
position.
3. Securely tighten the arm tube
adjustment knob.
FIGURE 2 Attaching/Adjusting the Arm
Tube
Adjusting Height
NOTE: For this procedure, refer to FIGURE 3.
1. Loosen the adjustment knobs that
secure the U‐clamps to the clamp
assemblies.
2. Slide support tube through the
U‐clamps up or down until desired
position is obtained.
3. Securely tighten adjustment knobs that
secure the U‐clamps to the clamp
assemblies.
FIGURE 3 Adjusting Height
Arm Tube
Adjustment
Knob
Arm Pad
Adjustment
Knobs
U-Clamps
Support
Tube