Intel IMB200VGE - Manual (Page 53)

IMB200 LGA775 ATX MB User Manual
Award Bios Utility 47
Manual If you want better performance for your system other
than the one “ by SPD “ select “ Manual “ then
select the best option in the “ CAS Latency Time “
To “System Memory Frequency “fields.
z CAS Latency Time
This refers to the Column Address Strobe delay time. Lower is
better! However, in a P4 system, lowering this setting only
improves performance minimally, so it might be better to
increase this setting to gain stability or a higher over clock.
z Active Precharge Delay
This refers to the Active to Precharge delay time. Lower is
better! However, same as above, lowering this setting only
improves performance minimally, so it might be better to
increase this setting to gain stability or a higher over clock.
z DRAM RAS# to CAS# Delay
This refers to the Row Address Strobe to Column Address
Strobe delay time. Lower is better! This is the most crucial
setting in a P4 system! Lowering this setting improves
performance quite noticeably, so you might want to sacrifice
some clock speed to lower this timing.
z DRAM RAS# Precharge
This refers to the Row Address Strobe to Column Address
Strobe delay time. Lower is better! This is the 2nd most
crucial setting in a P4 system! Lowering this setting
improves performance quite noticeably, so you might want to
sacrifice some clock speed to lower this timing
z System Memory Frequency
The Intel 865G Support Intel DDR 266/333/400.This setting
could help you and setup the DRAM clock for DDR memory
module. The default setting was
Auto
z System BIOS Cacheable
When this field is enabled, accesses to the system BIOS
ROM
Address at F0000H-FFFFFH are cached, provide that the
cache controller is enabled.
z Video BIOS Cacheable
As with caching the system BIOS, enabling the Video BIOS