Intel GA-8N775 - Manual (Page 37)

BIOS Setup - 37 -
English
IDE Secndry Slave RAID
Enabled Enable 2nd slave channel IDE RAID function.
Disabled Disable this function. (Default value)
SATAII 1 Primary RAID
Enabled Enable SATAII 1 1st SATA RAID function.
Disabled Disable this function. (Default value)
SATAII 1 Secondary RAID
Enabled Enable SATAII 1 2nd SATA RAID function.
Disabled Disable this function. (Default value)
SATAII 2 Primary RAID
Enabled Enable SATAII 2 1st SATA RAID function.
Disabled Disable this function. (Default value)
SATAII 2 Secondary RAID
Enabled Enable SATAII 2 2nd SATA RAID function.
Disabled Disable this function. (Default value)
On-Chip IDE Channel0
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip IDE Channel1
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
IDE1 Conductor Cable
Auto BIOS autodetects IDE1 conductor cable. (Default value)
ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable are compatible with ATA66/100/133).
ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable are compatible with ATA33).
IDE2 Conductor Cable
Auto BIOS autodetects IDE2 conductor cable. (Default value)
ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable are compatible with ATA66/100/133).
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable are compatible with ATA33).
Serial-ATAII 1
Enabled Enable Serial ATA II 1 support. (Default value)
Disabled Disable Serial ATA II 1 support.
Serial-ATAII 2
Enabled Enable Serial ATA II 2 support. (Default value)
Disabled Disable Serial ATA II 2 support.