English, 2 advanced bios features, Hard disk boot priority – Intel GA-8N775 User Manual

Page 34: First / second / third boot device, Boot up floppy seek

GA-8N775 Motherboard

- 34 -

English

2-2

Advanced BIOS Features

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press to exit this menu.

First / Second / Third Boot Device

Floppy

Select your boot device priority by Floppy.

LS120

Select your boot device priority by LS120.

Hard Disk

Select your boot device priority by Hard Disk.

CDROM

Select your boot device priority by CDROM.

ZIP

Select your boot device priority by ZIP.

USB-FDD

Select your boot device priority by USB-FDD.

USB-ZIP

Select your boot device priority by USB-ZIP.

USB-CDROM Select your boot device priority by USB-CDROM.

USB-HDD

Select your boot device priority by USB-HDD.

LAN

Select your boot device priority by LAN.

Disabled

Disable this function.

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.

Enabled

BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that
BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80 tracks.

Disabled

BIOS will not search for the type of floppy disk drive by track number. Note that
there will not be any warning message if the drive installed is 360K. (Default value)

" # " System will detect automatically and show up when you install the Intel

Pentium

processor with HT Technology.

Advanced BIOS Features

` Hard Disk Boot Priority

[Press Enter]

First Boot Device

[Floppy]

Second Boot Device

[Hard Disk]

Third Boot Device

[CDROM]

Boot Up Floppy Seek

[Disabled]

Password Check

[Setup]

CPU Hyper-Threading

[Enabled]

Limit CPUID Max. to 3

[Disabled]

No-Execute Memory Protect

(Note)

[Enabled]

CPU Enhanced Halt (C1E)

(Note)

[Enabled]

CPU Thermal Monitor 2(TM2)

(Note)

[Enabled]

CPU EIST Function

(Note)

[Enabled]

Full Screen LOGO Show

[Enabled]

Init Display First

[PEG]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help
Menu Level`

Select Hard Disk Boot
Device Priority

(Note) This item will show up when you install a processor which supports this function.