IBM 22P6415 - Manual (Page 47)

Click Apply to complete the configuration of your Virtual Server.
Note: The configuration changes made through the Web-based setup utility are
automatically saved into the flash memory within 30 seconds after
clicking Apply.
Change password
From the left-hand navigation bar, click Change password to display the
Change password table.
The Administrator Login Name and Administrator Login Password can be
changed in this table. The default login name is
″default.″ A password is not
required. For security reasons, you might want to change the Administrator
Login Name and Password.
Click Apply to complete the configuration.
Note: The configuration changes made through the Web-based setup utility are
automatically saved into the flash memory within 30 seconds after
clicking Apply.
Part 5: Using tools for advanced configuration 5-19