Wireless settings - status monitor – IBM 22P6415 User Manual

Page 19

Text mode
Original mode

Block or Allow: You can list specific MAC addresses to block or allow in this
window. Blocking a specific MAC address will allow everyone else with the
correct settings to access the LAN and the Gateway. Allowing a specific MAC
address will allow only that MAC address access to the LAN and Gateway as
long as WEP and ESSID are correct.

Wireless Settings - Status Monitor

The Status monitor is an advanced function for experts only. Click Status
monitor

in the left-hand navigation bar to display the following window.

IEEE 802.11b Wireless LAN Access Point General
Information

v MAC Address (BSS ID): 00-00-00-00-00-00

v Frequency Domain

v Statistics

v Wireless Transmit

v Wireless Receive

v Fragments: 0

v Unicast Packets: 0

v Unicast Bytes: 0

Part 3: Setting up the wireless access point in the IBM High Rate Wireless LAN Gateway

3-5