IBM 22P6415 - Manual (Page 30)

v DHCP: The DHCP feature can be enabled or disabled.
v DHCP Start Address: This is the starting IP address of the IP address
pool in the DHCP server. The default is 192.168.1.11.
v DHCP End Address: This is the end address of the address pool in the
DHCP server. The default is 192.168.1.254.
2. Click Apply to complete the configuration of the DHCP server.
Note: The configuration changes made through the Web-based setup utility
are automatically saved into the flash memory within 30 seconds
after clicking Apply.
Fixed IP table
This feature is useful for those servers that want permanently assigned IP
addresses. These client computers are identified by their MAC addresses. To
permanently assign an IP address to a client, do the following:
1. Click Advanced Configuration → DHCP Configuration → Fixed IP to
display the Fixed IP table.
5-2 IBM
®
High Rate Wireless LAN Gateway: User’s Guide