IBM 22P6415 - Manual (Page 31)

2. Click Add to add a new entry in the Fixed IP table.
v IP Address: The specified IP address for the client device. This IP
address must be within the address pool in the DHCP server.
v MAC Address: The MAC address of the client device
v Remark: The descriptions of the client device that needs the fixed IP
address
3. Click Apply. A new entry is added to the Fixed IP table.
Note: The configuration changes made through the Web-based setup utility
are automatically saved into the flash memory within 30 seconds
after clicking Apply.
Excluded IP table
The feature is useful when some of the IP addresses in the pool are already
manually assigned to client computers on the LAN. To exclude an IP address
from the DHCP server, do the following:
1. Click Advanced Configuration → DHCP → Excluded IP to display the
Excluded IP table.
Part 5: Using tools for advanced configuration 5-3