Dream Multimedia Dreambox DM 7025 - Manual (Page 65)

- 65 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
english
11.1.3 Two satellites via DiSEqC A/B (DVB-S)
Use this type of configuration if you want to receive two satellites from one Twin Universal or
Quad Universal LNB. It does not matter if you use one or two dishes to achieve this.
In this case the LNBs are connected to a so-called Multiswitch from which the signal is via
coax cabled to the satellite receivers (Dreamboxes) in your household.
Please read the section 11.1 DVB-S configuration to learn how to get into this menu.
The “Satconfig” menu will open up.
Use the up/down-Buttons to navigate to the
“DiSEqC-Mode” option and use the left/right-
Buttons to select “DiSEqC A/B”.
For Port A and Port B select the desired satellites
just as described in the Single satellite – direct
connection section.
Make sure you know which satellite is connected to
which input on the Toneburst switch.
If you do not find any services in the transponder
scan later, exchange the two satellites in this list and
try again.
Press the OK-Button to save your settings.