Dream Multimedia Dreambox DM 7025 - Manual (Page 22)

- 22 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
english
4. Basic
operation
4.1
Turning your Dreambox on and off
Use the Power-Button to turn your Dreambox on and off.
To put your Dreambox into Standby-Mode either press the Power-Button on your remote
control or directly on your Dreambox. The current time will be shown in the Dreambox’s LC-
Display.
Holding down the Power-Button on your remote control for three seconds will put your
Dreambox into the Deep-Standby-Mode
.
You can also put your Dreambox into Deep-Standby-Mode by using the OSD main menu.
Choose the Option “Standby / Restart” in the OSD main menu and navigate to “Deep
Standby” option afterwards. Pressing the OK-Button will put your Dreambox into the Deep-
Standby-Mode.
Alternatively you can push down the Power-Button on your Dreambox for 5 seconds. If no
OSD Menu is visible on the screen this will also put your Dreambox into Deep-Standby-
Mode.
All your settings will be saved now and your Dreambox goes into Deep-Standby-Mode
afterwards (saves energy!).
This is the Standby / Restart menu.
Navigate to the desired option and
confirm by pressing the OK-Button.
Restart:
Your Dreambox will be rebooted.
Deep Standby:
Puts your Dreambox into Deep-Standby-Mode.
4.2 Service selection
Pressing the Left/Right-Buttons on your Dreambox remote control will take you to the
previous or next service.
Pressing the 0 on the Numeric-Keypad will enable you to skip back and forth between the
two most recently watched services. This feature is quite useful during commercial breaks
since it enables you to watch another channel and quickly check if your movies is back on.