Dream Multimedia Dreambox DM 7025 - Manual (Page 15)

- 15 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
english
Explanation remote control buttons
The SHIFT/ SETUP-Button is used to preprogram the remote control to operate a TV.
See chapter 14. TV-Mode setup.
The Power-Button switches your Dreambox on and off.
See chapter 4.1 Turning your Dreambox on and off.
The DREAM-Mode-Button switches your remote control into Dreambox control mode. It will
shortly light up once your press the button.
The TV-Mode-Button switches your remote control into TV control mode to control your
preprogrammed TV. It will shortly light up once your press the button.
See chapter 14. TV-Mode setup.
Enter a service number to directly access the option by using the Numeric Keypad. The
service numbers are on the left side of the service list.
The Numeric Keypad can also be used to enter the teletext page number when you are in
TV-Control-Mode and if your TV is teletext capable. The TV station has to submit teletext
information; otherwise this feature cannot be used.
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the
last 20 channels you have watched. If you have selected a sub service (see chapter 4.6) you
can use these buttons to switch to the next sub service.
SHIFT / SETUP-Button
Power-Button
TV-Mode-Button
Numeric-Keypad
Arrow-Left-Button Arrow-Right-Button
DREAM-Mode-Button