Dream Multimedia Dreambox DM 7025 - Manual (Page 43)

- 43 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
english
7.3.3 Recording by timer
With the help of a timer you can record shows (if you have a hard disk installed). You are
offered two different ways to program a timer, the manual way of via the EPG.
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Timer” and press the OK-Button to select
.
You see the “Timer Editor“ menu.
Pressing the red Options-Button will delete a timer.
The green Options-Button adds a timer, the yellow
Options-Button toggles active on and off (only
possible in waiting status) and the blue Options-
Button removes finished timers from the list.
To edit an existing time select it and press the OK-
Button.
The status of a timer is shown on the right side:
- waiting means: still coming up
- recording means: recording right now
- done means: recording finished
- the red X indicates that a timer was deactivated
If you pressed the blue Options-Button you will be
asked if you really want to delete the finished timer.
Use the Navigation-Buttons up and down to select.
Press the OK-Button to activate.