All vehicles – shaft head unit provisions – Metra Electronics AW-200GM User Manual

Page 32

Kit Assembly 99-2001, AW-200GM

All vehicles – Shaft head unit provisions

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

1. Slide the aftermarket head unit into the

kit from the back and secure with the

shaft nuts provided with the new

head unit.

Note: If an equalizer will be included

slide the unit into the back of the

radio housing and secure. If an

equalizer will NOT be included,snap

the equalizer dummy plate into the

opening in the radio housing

4. Reassemble dash in reverse order

of disassembly.